Instructions For Authors

Getting Started

Authors need to submit their manuscripts through the online submission platform available at https://editorialassist.com/ajc. Articles submitted as hard copies are not accepted.

All first-time users need to register themselves. Registration is free. Once registered, authors can use their username and password to submit and keep track of their articles. In case of any problems, the author can contact the Technical Assistance at technical.team@scientificscholar.com

Types of Manuscripts

Arabian Journal of Chemistry publishes manuscripts in the following categories:

Original Article
Review Article

General Information

Arabian Journal of Chemistry (AJC) publishes original works and findings that contribute to the advancements in the field of Inorganic, Physical, Organic, Analytical, Medicinal Chemistry and Biochemistry.

Author Responsibility

The journal accepts only original work that has not been published elsewhere. All authors must confirm that neither the manuscript nor any part of it was written or published or is under consideration for publication elsewhere. Publication of the content as an abstract during the proceedings of meetings is not considered prior publication and can be submitted for publication. At the time of submission, authors should disclose details, if the study described in the manuscript had been previously presented in a meeting or published as an abstract. The details have to be mentioned in the Acknowledgments section. Any use of previously published material protected by copyright laws must be acknowledged in the manuscript. Publishing of material on a website may be considered prior publication and should be mentioned at the time of submission. Authors should disclose details of related papers even those authored in a different language.
After the manuscript is accepted, it is not possible to add/remove/modify the name of any author.
Authorship credit should be based only on substantial contributions to any of the four components mentioned below:

Concept and design of the study, acquisition of data, or analysis and interpretation of data;
Drafting the article or revising it critically for important intellectual content;
Final approval of the version to be published; and
Aptitude to be accountable for all aspects of the work in ensuring that questions related to the accuracy or integrity of any part of the work are appropriately investigated and resolved.

Each contributor should have participated sufficiently in the work to take public responsibility for the appropriate content of the manuscript. The order of naming the contributors should be based on the relative contribution of the individual included for authorship credit toward the study itself and the writing of the manuscript. Once the article has been submitted, the order cannot be changed without written consent from all the contributors. The journal prescribes a maximum number of eight authors for all categories of manuscripts except for Case Reports and Case Series that will have a maximum of four authors.
The authors need to identify one author who will correspond with the Journal office in all matters related to the manuscript called the Corresponding Author. The content of the final manuscript including changes suggested by the Editor or reviewer of the manuscript is the responsibility of the corresponding author.

Ethics

Studies conducted must adhere to and be in accordance with The Code of Ethics of the World Medical Association (Declaration of Helsinki) for experiments involving humans. According to (Federal Research Misconduct Policy) scientific misconduct includes:

Data falsification: Fabrication, deceptive and selective reporting of findings, suppression of data and/or distortion of data
Plagiarism: Use without permission the language, ideas, or thoughts of another and representation of them as one’s original work

Direct copying of sentences, whether from their previously published paper or someone else’s paper, is considered plagiarism. Authors need to check that they have not inadvertently ‘cut and paste’ verbatim from published works.

Plagiarism

Plagiarism is the use of others published and unpublished ideas or words (or other intellectual property) without attribution or permission, and presenting them as new and original rather than derived from an existing source. The intent and effect of plagiarism are to mislead the reader as to the contributions of the plagiarizer. This applies to whether the ideas or words are taken from abstracts, research grant applications, Institutional Review Board applications, or unpublished or published manuscripts in any publication format (print or electronic).
Self-plagiarism refers to the practice of an author using portions of their previous writings on the same topic in another of their publications, without specifically citing it formally in quotes. This practice is widespread and sometimes unintentional. The journal requires authors to disclose information and cite references about reused content from previously published work of their own or of others. The journal does not allow more than a 25% similarity score; the journal measures this via iThenticate.
Incorrect authorship: Excluding authors, wrongly presenting the same material as original in more than one publication, the inclusion of authors who have not made a definite contribution to the work published; or submission of articles without the concurrence of all authors.
Misappropriation of the ideas of others: an important aspect of scholarly activity is the exchange of ideas among colleagues. Scholars can acquire novel ideas from others during the process of reviewing grant applications and manuscripts. However, improper use of such information can constitute fraud. Wholesale appropriation of such material constitutes misconduct.
Violation of generally accepted research practices: Improper manipulation of experiments to obtain biased results, deceptive statistical or analytical manipulations, or improper reporting of results.
Material failure to comply with legislative and regulatory requirements affecting research: Violations of regulations and laws involving the use of funds, care of animals, human subjects, investigational drugs, recombinant products, new devices, or radioactive, biologic, or chemical materials.
Any form of unethical behavior is strictly discouraged and will result in the submitting author and his group being banned from submitting material to the journal for a time frame depending on the severity of malpractice.

Digital Image Editing Ethics

No particular feature within an image may be introduced, moved, enhanced, obscured, or removed. Adjustments of brightness, contrast, or color balance are allowed if they are applied to the whole image and do not obscure or eliminate any information present in the original image. Adjustments such as changes to settings must be disclosed in the figure legend.

Contribution Details

The authors should provide a description of contributions made by each of them toward the manuscript. The description should be divided into the following categories, as deemed applicable: concept, design, the definition of intellectual content, literature search, clinical studies, experimental studies, data acquisition, data analysis, statistical analysis, manuscript preparation, manuscript editing, and manuscript review. One or more authors should take responsibility for the integrity of the work as a whole from inception to published article and should be designated as ‘guarantor’ or ‘guarantors’.

Conflicts of Interest/Competing Interests

All authors must disclose any and all conflicts of interest they may have with the publication of the manuscript or any institution or product that is mentioned in the manuscript and/or is important to the outcome of the study presented. Authors should also disclose any conflict of interest with products that compete with those mentioned in their manuscript.

Institutional Review Board Approval and Informed Consent

All prospective and retrospective human studies must have appropriate institutional review board approval, and signed informed consent from all human participants is required. All animal studies must have an appropriate institutional review board or animal care committee approval.
Compliance with these rules must be stated in the text, including a waiver of consent by the board, if applicable. Manuscripts that do not comply with these rules will not be accepted for publication.
Patient consent and or Ethical approval statements along with Protocol number and date must be included in all research articles.

Protection of Patients’ Right to Privacy

For all research involving human subjects, informed consent to participate in the study should be obtained from participants (or their parent or guardian in the case of children under 16) and a statement to this effect should appear in the manuscript.
Identifying information, including patients’ names, initials, or hospital numbers, should not be published in written descriptions, CT scans, photographs, sonograms, and pedigrees unless the information is essential for scientific purposes and the patient (or parent or guardian) gives written informed consent for publication. Informed consent for this purpose requires that a patient who is identifiable be shown the manuscript to be published.
Informed consent should be obtained if there is any doubt that anonymity can be maintained. For example, masking the eye region in photographs of patients is inadequate protection of anonymity. If identifying characteristics are altered to protect anonymity, such as in genetic pedigrees, authors should assure that alterations do not distort scientific meaning and editors should so note.

Reporting Guidelines

Reports of randomized clinical trials should present information on all major study elements, including the protocol, assignment of interventions (methods of randomization, concealment of allocation to treatment groups), and the method of masking (blinding), based on the CONSORT Statement.
Reporting Guidelines for Specific manuscript types are given below. A statement of compliance with the appropriate guideline must be included on the title page of the manuscript.

Guideline	Type of Study	Source
STROBE	Observational studies including cohort, case-control, and cross-sectional studies	https://www.strobe-statement.org/index.php?id=available-checklists
CONSORT	Randomized controlled trials	http://www.consort-statement.org
SQUIRE	Quality improvement projects	http://squire-statement.org/index.cfm?fuseaction=Page.ViewPage&PageID=471
PRISMA	Systematic reviews and meta-analyses	http://prisma-statement.org/PRISMAStatement/Checklist.aspx
STARD	Studies of diagnostic accuracy	https://pubs.rsna.org/doi/full/10.1148/radiol.2015151516
CARE	Case Reports	https://www.care-statement.org/checklist
AGREE	Clinical Practice Guidelines	https://www.agreetrust.org/wp-content/uploads/2016/02/AGREE-Reporting-Checklist-2016.pdf
SPIRIT	Protocol Reporting	https://spirit-statement.org/title/
COREQ	Qualitative Studies	https://cdn.elsevier.com/promis_misc/ISSM_COREQ_Checklist.pdf

The reporting guidelines for other types of studies can be found at https://www.equator-network.org/reporting-guidelines/.

The Editorial Process

Arabian Journal of Chemistry has a highly rigorous double-blind peer-review process that makes sure that manuscripts are scientifically accurate, relevant, novel, and meaningful.

Manuscripts are subjected to an unbiased double-blinded peer-review process. Decisions on accepting manuscripts for publication are solely based on the peer-review process, and the Editor’s discretion and the decision are final. The manuscript is sent for peer review to at least two external reviewers, and if required, it is sent to a third reviewer to act as a tie-breaker. A completed review by two reviewers recommending the acceptance of the manuscript for publication is mandatory.

Manuscripts submitted for publication in the Arabian Journal of Chemistry are sent for blind review. The journal follows a double-blind review process, wherein the reviewers and authors are unaware of each other’s identity. The comments and suggestions (acceptance/rejection/amendments to the manuscript) received from reviewers are conveyed to the author. The author is requested to provide a point-by-point response to reviewers’ comments and submit a revised manuscript version. This process is repeated until reviewers and editors are satisfied with the manuscript.

Manuscripts accepted for publication are copy-edited for grammar, punctuation, print style, and format. Galley proofs are sent to the author. The author is expected to return the corrected proofs within three days. It may not be possible to incorporate corrections received after that period. The process of submitting the manuscript to the final decision and sending and receiving proofs is completed online. To achieve faster and greater dissemination of knowledge and information, the journal publishes articles online immediately on final acceptance.

Manuscripts that do not conform to the Author Guidelines or exceed the Maximums set for Articles may be returned to the author without review. Authors can resubmit after complying with the requirements.

In-house submissions
In-house submissions that contain the work of any editorial board member are not allowed to be reviewed by that editorial board member, and an independent editor makes all decisions regarding this manuscript. In addition, these manuscripts are reviewed by two external reviewers. This is also disclosed in the published manuscript under the section of Conflict of Interest.

Preparation of the Manuscript

The manuscript should be double-spaced, with a 2.5 cm margin, 12-point Times New Roman font, and justified. The pages of the manuscript should be numbered on the bottom right corner.

Language and Writing Style

The manuscript should be written in British English. The author should write the full term for each abbreviation at its first use in the title, abstract, keywords, and text separately unless the abbreviation is a standard unit of measure. The use of acronyms and abbreviations must be kept to a minimum. When used, they are defined at first mention, followed by the acronym or abbreviation in parentheses. If a brand name is cited, supply the manufacturer’s name and address (city, state, and country). Manuscripts will be altered to meet the style guidelines of the Arabian Journal of Chemistry. The authors are requested to check the manuscript for spelling, grammar, and punctuation errors before submission. Headings and titles must be in Title Case.

Organization of Sections in an Article

Sections

Divide your article into clearly defined and numbered sections. Subsections should be numbered 1.1 (then 1.1.1, 1.1.2, …), 1.2, etc. (the abstract is not included in section numbering). Use this numbering also for internal cross-referencing: do not just refer to ‘the text’. Any subsection may be given a brief heading. Each heading should appear on its own separate line.

Cover Page

Title. Concise and informative. Titles are often used in information-retrieval systems. Avoid abbreviations and formulae where possible.
Author names and affiliations. Please clearly indicate the given name(s) and family name(s) of each author and check that all names are accurately spelled. You can add your name between parentheses in your own script behind the English transliteration. Present the authors’ affiliation addresses (where the actual work was done) below the names. Indicate all affiliations with a lower-case superscript letter immediately after the author’s name and in front of the appropriate address. Provide the full postal address of each affiliation, including the country name and, if available, the e-mail address of each author.
Corresponding author. Clearly indicate who will handle correspondence at all stages of refereeing and publication, also post-publication. This responsibility includes answering any future queries about Methodology and Materials. Ensure that the e-mail address is given and that contact details are kept up to date by the corresponding author.
Present/permanent address. If an author has moved since the work described in the article was done, or was visiting at the time, a ‘Present address’ (or ‘Permanent address’) may be indicated as a footnote to that author’s name. The address at which the author actually did the work must be retained as the main, affiliation address. Superscript Arabic numerals are used for such footnotes.

Abstract

A concise and factual abstract is required. The abstract should state briefly the purpose of the research, the principal results and major conclusions. An abstract is often presented separately from the article, so it must be able to stand alone. For this reason, References should be avoided, but if essential, then cite the author(s) and year(s). Also, non-standard or uncommon abbreviations should be avoided, but if essential they must be defined at their first mention in the abstract itself.

Keywords

Immediately after the abstract, provide a maximum of 6 keywords, using American spelling and avoiding general and plural terms and multiple concepts (avoid, for example, ‘and’, ‘of’). Be sparing with abbreviations: only abbreviations firmly established in the field may be eligible. These keywords will be used for indexing purposes..

Introduction

State the objectives of the work and provide an adequate background, avoiding a detailed literature survey or a summary of the results.

Material and Methods

Provide sufficient details to allow the work to be reproduced by an independent researcher. Methods that are already published should be summarized, and indicated by a reference. If quoting directly from a previously published method, use quotation marks and also cite the source. Any modifications to existing methods should also be described.

Results

Results should be clear and concise.

Discussion

This should explore the significance of the results of the work, not repeat them. A combined Results and Discussion section is often appropriate. Avoid extensive citations and discussion of published literature.

Conclusions

The main conclusions of the study may be presented in a short Conclusions section, which may stand alone or form a subsection of a Discussion or Results and Discussion section.

Appendices

If there is more than one appendix, they should be identified as A, B, etc. Formulae and equations in appendices should be given separate numbering: Eq. (A.1), Eq. (A.2), etc.; in a subsequent appendix, Eq. (B.1) and so on. Similarly for tables and figures: Table A.1; Fig. A.1, etc.

Abbreviations

Define abbreviations that are not standard in this field in a footnote to be placed on the first page of the article. Such abbreviations that are unavoidable in the abstract must be defined at their first mention there, as well as in the footnote. Ensure consistency of abbreviations throughout the article.

Acknowledgements

Collate acknowledgements in a separate section at the end of the article before the references and do not, therefore, include them on the title page, as a footnote to the title or otherwise. List here those individuals who provided help during the research (e.g., providing language help, writing assistance or proof reading the article, etc.).

Formatting of funding sources

You are requested to identify who provided financial support for the conduct of the research and/or preparation of the article and to briefly describe the role of the sponsor(s), if any, in study design; in the collection, analysis and interpretation of data; in the writing of the report; and in the decision to submit the article for publication. If the funding source(s) had no such involvement, it is recommended to state this.

List funding sources in this standard way to facilitate compliance to funder’s requirements:

Funding: This work was supported by the National Institutes of Health [grant numbers xxxx, yyyy]; the Bill & Melinda Gates Foundation, Seattle, WA [grant number zzzz]; and the United States Institutes of Peace [grant number aaaa].

It is not necessary to include detailed descriptions on the program or type of grants and awards. When funding is from a block grant or other resources available to a university, college, or other research institution, submit the name of the institute or organization that provided the funding.

If no funding has been provided for the research, it is recommended to include the following sentence:

This research did not receive any specific grant from funding agencies in the public, commercial, or not-for-profit sectors.

Artwork

This section describes the artwork for this journal.

Electronic artwork

General points

Make sure you use uniform lettering and sizing of your original artwork.
Embed the used fonts if the application provides that option.
Aim to use the following fonts in your illustrations: Arial, Courier, Times New Roman, Symbol, or use fonts that look similar.
Number the illustrations according to their sequence in the text.
Use a logical naming convention for your artwork files.
Provide captions to illustrations separately.
Size the illustrations close to the desired dimensions of the published version.
Submit each illustration as a separate file.
Ensure that color images are accessible to all, including those with impaired color vision.

Color artwork

Please make sure that artwork files are in an acceptable format (TIFF, EPS or MS Office files) and with the correct resolution. If, together with your accepted article, you submit usable color figures these will be reproduced in color at no cost.

Statistics

Whenever possible quantify findings and present them with appropriate indicators of measurement error or uncertainty (such as confidence intervals). The authors should report losses to observation (such as dropouts from a clinical trial). When data are summarized in the Result section, specify the statistical methods used to analyze them. Avoid non-technical uses of technical terms in statistics, such as ‘random’ (which implies a randomizing device), ‘normal’, ‘significant’, ‘correlations’, and ‘sample’. Define statistical terms, abbreviations, and most symbols. Specify the computer software used. For all P values include the exact value and not less than 0.05 or 0.001. Mean differences in continuous variables, proportions in categorical variables and relative risks including odds ratios and hazard ratios should be accompanied by their confidence intervals.

References

This section describes the references for this journal.

Citation in text

Please ensure that every reference cited in the text is also present in the reference list (and vice versa). Any references cited in the abstract must be given in full. Unpublished results and personal communications are not recommended in the reference list, but may be mentioned in the text. If these references are included in the reference list they should follow the standard reference style of the journal and should include a substitution of the publication date with either ‘Unpublished results’ or ‘Personal communication’. Citation of a reference as ‘in press’ implies that the item has been accepted for publication.

Web References

As a minimum, the full URL should be given and the date when the reference was last accessed. Any further information, if known (DOI, author names, dates, reference to a source publication, etc.), should also be given. Web references can be listed separately (e.g., after the reference list) under a different heading if desired, or can be included in the reference list.

Data references

This journal encourages you to cite underlying or relevant datasets in your manuscript by citing them in your text and including a data reference in your Reference List. Data references should include the following elements: author name(s), dataset title, data repository, version (where available), year, and global persistent identifier. Add [dataset] immediately before the reference so we can properly identify it as a data reference. The [dataset] identifier will not appear in your published article.

Preprint references

Where a preprint has subsequently become available as a peer-reviewed publication, the formal publication should be used as the reference. If there are preprints that are central to your work or that cover crucial developments in the topic, but are not yet formally published, these may be referenced. Preprints should be clearly marked as such, for example by including the word preprint, or the name of the preprint server, as part of the reference. The preprint DOI should also be provided.

References in a special issue

Please ensure that the words ‘this issue’ are added to any references in the list (and any citations in the text) to other articles in the same Special Issue.

Reference management software

Most Elsevier journals have their reference template available in many of the most popular reference management software products. These include all products that support Citation Style Language styles, such as Mendeley. Using citation plug-ins from these products, authors only need to select the appropriate journal template when preparing their article, after which citations and bibliographies will be automatically formatted in the journal’s style. If no template is yet available for this journal, please follow the format of the sample references and citations as shown in this Guide. If you use reference management software, please ensure that you remove all field codes before submitting the electronic manuscript. More information on how to remove field codes from different reference management software

Reference style

Text: All citations in the text should refer to:

1. Single author: the author’s name (without initials, unless there is ambiguity) and the year of publication;

2. Two authors: both authors’ names and the year of publication;

3. Three or more authors: first author’s name followed by ‘et al.’ and the year of publication.

Citations may be made directly (or parenthetically). Groups of references can be listed either first alphabetically, then chronologically, or vice versa.

Examples: ‘as demonstrated (Allan, 2000a, 2000b, 1999; Allan and Jones, 1999)… Or, as demonstrated (Jones, 1999; Allan, 2000)… Kramer et al. (2010) have recently shown…’

List: References should be arranged first alphabetically and then further sorted chronologically if necessary. More than one reference from the same author(s) in the same year must be identified by the letters ‘a’, ‘b’, ‘c’, etc., placed after the year of publication.

Examples:

Reference to a journal publication:

Van der Geer, J., Hanraads, J.A.J., Lupton, R.A., 2010. The art of writing a scientific article. J. Sci. Commun. 163, 51-59. https://doi.org/10.1016/j.Sc.2010.00372.

Reference to a journal publication with an article number:

Van der Geer, J., Hanraads, J.A.J., Lupton, R.A., 2018. The art of writing a scientific article. Heliyon. 19, e00205. https://doi.org/10.1016/j.heliyon.2018.e00205.

Reference to a book:

Strunk Jr., W., White, E.B., 2000. The Elements of Style, fourth ed. Longman, New York.

Reference to a chapter in an edited book:

Mettam, G.R., Adams, L.B., 2009. How to prepare an electronic version of your article, in: Jones, B.S., Smith , R.Z. (Eds.), Introduction to the Electronic Age. E-Publishing Inc., New York, pp. 281-304.

Reference to a website:

Cancer Research UK, 1975. Cancer statistics reports for the UK. http://www.cancerresearchuk.org/aboutcancer/statistics/cancerstatsreport/ (accessed 13 March 2003).

Reference to a dataset:

[dataset] Oguro, M., Imahiro, S., Saito, S., Nakashizuka, T., 2015. Mortality data for Japanese oak wilt disease and surrounding forest compositions. Mendeley Data, v1. https://doi.org/10.17632/xwj98nb39r.1.

Reference to software:

Coon, E., Berndt, M., Jan, A., Svyatsky, D., Atchley, A., Kikinzon, E., Harp, D., Manzini, G., Shelef, E., Lipnikov, K., Garimella, R., Xu, C., Moulton, D., Karra, S., Painter, S., Jafarov, E., & Molins, S., 2020. Advanced Terrestrial Simulator (ATS) v0.88 (Version 0.88). Zenodo. https://doi.org/10.5281/zenodo.3727209.

Personal Author(s):

Ringsven MK, Bond D. Gerontology and leadership skills for nurses. 2nd ed. Albany (NY): Delmar Publishers; 1996.

Editor(s), compiler(s) as author:

Norman IJ, Redfern SJ, editors. Mental health care for elderly people. New York: Churchill Livingstone; 1996.

Chapter in A Book
Turgut AT, Dogra VS. Prostate carcinoma: Evaluation using transrectal sonography. In: Hayat MA, ed. Methods of cancer diagnosis, therapy and prognosis. 1st ed. New York, NA: Elsevier; 2008. p. 499-520.

Electronic Sources as Reference

Refer APA’s Quick guide on reference for electronic references.

Monograph on the Internet format: Foley KM, Gelband H, editors. Improving palliative care for cancer [monograph on the Internet]. Washington: National Academy Press; 2001 [cited 2002 Jul 9].

Refer Homepage/Web site and Part of a homepage/Web site formats in the hyperlink provided

Tables

Please submit tables as editable text and not as images. Tables can be placed either next to the relevant text in the article, or on separate page(s) at the end. Number tables consecutively in accordance with their appearance in the text and place any table notes below the table body. Be sparing in the use of tables and ensure that the data presented in them do not duplicate results described elsewhere in the article. Please avoid using vertical rules and shading in table cells.

Graphs

Graphs need to be exported as JPEG or TIF images and submitted as figures. Graphs and line drawings need to be a minimum of 1000 dpi. Graphs should include clearly labeled error bars described in the figure legend. The authors must state whether a number that follows the ± sign is a standard error (SEM) or a standard deviation (SD). The number of independent data points (N) represented in a graph must be indicated in the legend. Numerical axes on graphs should go to 0, except for log axes.

Supplementary material

Supplementary material such as applications, images and sound clips, can be published with your article to enhance it. Submitted supplementary items are published exactly as they are received (Excel or PowerPoint files will appear as such online). Please submit your material together with the article and supply a concise, descriptive caption for each supplementary file. If you wish to make changes to supplementary material during any stage of the process, please make sure to provide an updated file. Do not annotate any corrections on a previous version. Please switch off the ‘Track Changes’ option in Microsoft Office files as these will appear in the published version.

Figure/Image Legends

Ensure that each illustration has a caption. Supply captions separately, not attached to the figure. A caption should comprise a brief title (not on the figure itself) and a description of the illustration. Keep text in the illustrations themselves to a minimum but explain all symbols and abbreviations used.

Figures/Images

All images should be uploaded in JPEG, or TIF, format. The file size should be within 12 MB in size. Figures should be numbered consecutively according to the order in which they have been first cited in the text. Labels, numbers, and symbols should be clear and of uniform size. The lettering for figures should be large enough to be legible after reduction to fit the width of a printed column. Symbols, arrows, or letters used in photomicrographs should contrast with the background and should be marked neatly with transfer type or by tissue overlay and not by pen. Titles and detailed explanations belong in the legends for figures not on the figure/image themselves. The photographs and figures should be trimmed to remove all the unwanted areas and the patient’s name and medical record number. If photographs of individuals are used, their pictures must be accompanied by written permission to use the photograph and eyes must be covered. If a figure has been published elsewhere, the original source must be acknowledged and written permission from the copyright holder submitted to reproduce the material. A credit line should appear in the legend for such figures. Electronic manipulation of images that materially alters the medical information must be identified and the nature of the alterations described. Symbols used must be uniform in size and style and large enough to withstand reduction. Line drawings and graphs should be in black on a white background, using the same size type as the text. 0.5 mm hairline rules must be avoided. Authors’ names and affiliations must not appear anywhere on the images.

Image Size

Black & white images: JPEG, or TIF format, Grayscale mode, and 300 DPI resolution. The height and width of an image should be at least 6 x 5 inches.

Color images: 300 DPI resolution, no layered files, no alpha channels. Color profile if used: CMYK (No Indexed Color, Lab, or RGB profiles)

Line art: 1200 DPI resolution, Grayscale or Jpeg format. No layered files, no alpha channels. Color profile if used: CMYK (No Indexed Color, Lab, or RGB profiles) The Journal reserves the right to crop, rotate, reduce, or enlarge the photographs to an acceptable size.

Video Clips

The journal encourages authors to submit video clips, cine clips, or real-time images (preferably in ‘mp4’). The maximum size of each multimedia file should not exceed 400 MB. In addition to the video content, authors must provide a still image from each video file. Supply TIFF or JPEG files.

Submission of the Manuscript

Online Manuscript Submission

All manuscripts must be submitted online at Arabian Journal of Chemistry. You will see step-by-step instructions when you are submitting your manuscript. You will need to submit the following documents as separate files.

Cover Page:
Cover page includes (a) complete manuscript title; (b) List all authors’ full names, highest academic degrees, professional titles, affiliations, and locations of affiliations; (c) name and address of the corresponding author, including, telephone number, and e-mail address and (d) sources of support that require acknowledgment, and a short title of no more than 45 characters (including spaces) for use as a running title.
Manuscript:
This document should include the title, abstract, keywords, manuscript body, and references. This must be in the document format. Acknowledgment Section should be included at the end of the main manuscript. Acknowledgment should not contain the name of the city or the institution.
Figures:
Figures must be submitted in .tiff or jpeg format. Color images should be of good quality. Each image should be less than 1 MB in size. The size of the image can be reduced by decreasing the actual height and width of the images (1240 x 800 pixels or 5-6 inches).

Figure legends are uploaded as a document format.

Graphs:
Do not embed them in the main manuscript. They should be uploaded separately at the time of uploading the figures in the “jpeg” or “tiff” format.
Tables:
Tables should be included in the main manuscript file after the references.
Copyright and disclosure forms are available for download from the author’s panel and should be uploaded as PDF files.
Author’s passport size photo is required and can be uploaded at the time of uploading figures etc.
Instruction on supplemental digital multimedia/video content: In addition to the video content, authors must provide a still image from each video file. Supply TIFF or JPEG files. These are also uploaded at the time of figure upload.

Specific Details for Each Manuscript Type

Original Article

An original article is a research paper based on unique findings and techniques and provides new information on the topic. The data section should be based on randomized clinical trials and contain information on all relevant study elements.

Appropriate statistical data is necessary for findings to be conclusive. The Methods section should contain the criteria for the selection of human participants and laboratory animals involved in the trials and provide evidence of approval from relevant ethics organizations. When human subjects are involved, the methods followed and the extent to which they were in accordance with ethical standards and Human Rights guidelines need to be indicated.

The article should include the following sections:
Abstract: Please provide Objectives, Material and Methods, Results, and Conclusion in brief in the Abstract and do not exceed 500 words.

Please provide the following in detail in the main article: Introduction, Material and Methods, Results, Discussion, and Conclusion (3000 words). Original articles can have references up to a maximum of 35, figures including subparts up to a maximum of 10, and Tables up to a maximum of 4.

Review Article

A review article is a balanced, in-depth scholarly study of the latest trends or present status of a specific timely topic, but is not an original article. No new data or personal experiences are presented. It is an analysis of the advances in the field based on a literature review of the topic. A review article includes a concise abstract limited to 500 words. The main article with a detailed description of each disease process with appropriate images and a valid conclusion can be a maximum of 3000 words. The author can include up to a maximum of 90 references, 30 figures including subparts, and up to 4 tables.

Publication/Processing Fee

Article Processing Charge

Arabian Journal of Chemistry charges the following publication fees on acceptance of the manuscripts.

Original Article: US$ 800 per manuscript
Review Article: US$ 800 per manuscript

Copyright and Open Access Statement

Authors Retain Copyright

All of the content published in the Arabian Journal of Chemistry is protected under the International copyright law, defined by Creative Commons and International Council of Medical Journal Editors (ICMJE). The author of an article retains the academic copyright of the content and can self-archive the article. The journal retains the commercial rights of the published content and publisher executes the commercial rights on behalf of the journal. The journal also grants to all readers and users a free, irrevocable, global, perpetual right of access to, and a license to copy, use, distribute and display the content publicly and to make and distribute derivative works in any digital medium for any reasonable and non-commercial purpose, subject to proper attribution of authorship and ownership of the copyrights under the Creative Commons Attribution-Noncommercial-Share Alike 4.0 International Public License.

Open Access Publication and Creative Commons Licensing

Arabian Journal of Chemistry Arabian Journal of Chemistry is an open-access journal, and manuscripts published are distributed under the terms of the Creative Commons Attribution-Non Commercial-Share Alike 4.0 License (CC-BY-NC-SA 4.0), which allows others to remix, transform, and build upon the work non-commercially, as long as appropriate credit is given and the new creations are licensed under the identical terms.

Compliance with Funder-Mandated Open Access Policies

An author whose work is funded by an organization that mandates the use of the Creative Commons Attribution-Non-Commercial-Share Alike 4.0 License is able to meet that requirement through the available open-access license for approved funders.

Privacy Statement

The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party. For any Questions or Difficulties please contact us technical.team@scientificscholar.com